In nearly all situations, most people spend quite a lot of money purchasing their lift truck. Therefore, it is very essential to take good care of it in order to protect your investment well into the long run. It is really a good idea to know the procedures that are undertaken in the maintenance and care of this piece of machine.
By starting up the forklift and listening closely how it runs is among the best ways to tell how good the engine is working. Like for example, if there are any knocks or misses, the equipment is faulty and this should raise several issues. Additionally listen closely for any squealing sounds that come from the belts as these sounds would provide you with a wealth of information.
Several of the main parts needing attention during maintenance comprise the gauges, horn, safety warning devices, the overhead guard and the lights. Any burnt out light bulbs or faulty components have to be replaced as soon as they are noticed. It is also vital to inspect the wiring.
After the above components have been inspected carefully, proceed to the battery compartment in order to see if the terminals are clean. If the terminals are not clean, be sure to clean them well. Each battery cell should be checked in order to ensure the fill level is topped up to the regulated amount.
An oil change is the next step to drain all the oil out of the equipment and after that change the filters. The hydraulic filter, the transmission filter and the fuel filters should be replaced regularly. Prior to fitting them, be sure to write the date on the new filters by utilizing a permanent marker in order to keep track.
When the oil change is finished and the filters have been replaced, a visual inspection of the drive axle has to be performed. If there is a grease fitting on the axle make sure to apply some grease. Inspect the belts on the engine for any frays or cracks. If you find any, fix the problem accordingly. Next, check every other part of the machinery including the wheels. If any kind of problem or fault is detected, be sure to deal with it immediately in order to make certain the machine is running at its safest and optimum levels.